Category: Application-Notes

Application-Notes Oscilloscope, Waveform, Digitizer, Sci-SDK, Readout Oscilloscope Basic Example Waveform Digitizer Dt1260 Sci-Sdk Readout An007

Usage of the oscilloscope module to monitor signal inside design

Introduction The Oscilloscope component in Sci-Compiler provides a powerful tool for monitoring analog signals connected to the analog inputs of the board, as well as internal signals within the designed diagram.

Read More +

Application-Notes Trigger, Processing, Spectroscopy Trigger Basic Example Dt1260 Processing Spectroscopy An008

Implementing trigger in Sci-Compiler

Introduction Trigger in the context of nuclear physics applications refers to a signal or event that initiates data acquisition and recording processes.

Read More +

Application-Notes Application-Notes Discriminator Threshold

USB Programmable Threshold Discriminator

This application note will show how to support a scientific application with an FPGA firmware, consisting of a signal discriminator with an arbitrary but fixed hardcoded threshold, designed and compiled with Sci-Compiler programming language and run on the SciDK development board.

Read More +

Application-Notes Application-Notes Wave Oscilloscope

Discriminator and event counter

The digitizer block in Sci-Compiler works as a programmable size FIFO to store waveform. It is possible to define, compiling time, the maximum number of channels, while at runtime it is possible to select which channels effectively dump.

Read More +

Application-Notes Charge-Integration, Sci-SDK, Waveform, QDC, Spectroscopy, Readout Charge-Integration Advanced Example Waveform QDC Spectroscopy Dt1260 Sci-Sdk Readout An009

Implementing digital QDC in Sci-Compiler

Introduction Digital charge integration, also known as QDC (charge-to-digital conversion), is a technique used to measure the energy of particles or photons detected by photomultiplier tubes (PMTs) or silicon photomultipliers (SiPMs).

Read More +

Application-Notes List, Time Tag, Sci-SDK, Readout List Time Tag Basic Example Dt1260 Sci-Sdk Readout An010

Time-tag events and readout data using List Component

Introduction Time tagging of events in a high-energy detector system refers to the process of accurately measuring and recording the timing information associated with the detected events.

Read More +

Application-Notes List Scaler Basic Example Dt1260 Sci-Sdk

Scaler with programmable d-well time

Introduction This application note explain how to design a firmware that can work with all Sci-Compiler FPGA compatible models that allows to use the board as a Multievent latching scaler housing up to both analog and digital channels.

Read More +

Application-Notes Multi Channels, Hierarchical, Subdesign, Sci-SDK Multi Channels Hierarchical Oscilloscope Register Sci-Sdk

Multi channels design with readout element in subdesign

Introduction SciCompiler’s advanced architecture allows hierarchical designs in multichannel application. This powerful feature enables designers to create complex systems by encapsulating functionality into discrete modules or blocks, which can then be nested within higher-level systems.

Read More +

Application-Notes Gate and Delay X2495 Gate and Delay An005

Using hardware Gate and Delay of the V2495 / DT5495 in Sci-Compiler project

This application note will demonstrate how to use the hardware Gate and Delay of the x2495 board to shape a digital signal introducing a programmable delay and width.

Read More +

Application-Notes Memory X5560 Memory An006

Maximize the available memory on R5560/SE to obtain 16Ksamples per waves on 32 channels

This code example for Sci-Compiler demostrate how to use the new Oscilloscope Dual component to digitize waveforms from 32 channel with a memory depth of 16Ksamples per channels at 14bits.

Read More +

Application-Notes Fifo, Custom Packet Fifo Custom Packet X5560 X2495 An001

Custom Packet Data Decode

Sci-Compiler allows to easy implement FIFO communication to transfer formatted data, like list of energy, timecode, channels from FPGA to user computer in form of structured packet

Read More +

Application-Notes Discriminator, Threshold Discriminator Threshold An002

Design a Fixed Threshold Discriminator with Sci-Compiler

This application note will show how to support a scientific application with an FPGA firmware, consisting of a signal discriminator with an arbitrary but fixed hardcoded threshold, designed and compiled with Sci-Compiler programming language and run on the SciDK development board.

Read More +

Application-Notes Wave, Oscilloscope, Waveform, Digitizer Wave Oscilloscope An003

Wave dump using digitizer component

The digitizer block in Sci-Compiler works as a programmable size FIFO to store waveform. It is possible to define, compiling time, the maximum number of channels, while at runtime it is possible to select which channels effectively dump.

Read More +

Application-Notes Clock, Synchronization, Multi-Device X5560 Clock Synchronization Multi-Device An004

Synchronize multiple R5560 / R5560SE to for simultaneous sampling on multiple device

This application notes explains how to synchronize multiple R5560/R5560SE to extend the number of input channels sampled simultaneously. This document covers the following task:

Read More +